Water Feature Pumps 350 LPH - mains powered
Our best range of pumps for powering water features and cascade waterfalls. They come in a wide range of sizes and the design of the pump does vary (see table below) depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.
"Hello Christine - Your customer service has been splendid, thank you. Many thanks for your excellent service" - Roy
Our pumps are reliable, efficient and guaranteed for two years. We recommend them for use in water features and cascades / waterfalls. They do not come with fountainheads and are not for creating fountains – if you want to create a fountain we recommend our Elimax or Libel range which are supplied with one or more fountainheads.
Our pumps are available in a range of sizes, from 350 litres / hour to 30,000 litres per hour. Each pump is supplied with 10 metres of cable except the 600lph and 750lph which has a 5m cable.
|Click picture to visit |
|Max Performance |
|Max Delivery Head |
|Power Consumption |
|Outlet Hosetail Size |
| ||350 ||40cm ||6w ||8+13mm ||Yes |
| ||450 ||60cm ||5w ||8+12mm ||Yes |
| ||600 ||110cm ||8w ||8+12mm ||Yes |
| ||750 ||160cm ||12w ||12mm ||No |
| ||1000 ||180cm ||16w ||12+15+18mm ||Yes |
| ||1500 ||250cm ||25w ||15+18mm ||Yes |
| ||2000 ||320cm ||45w ||18+25mm ||Yes |
| ||3000 ||370cm ||70w ||16+18mm ||Yes |
| ||4000 ||400cm ||99w ||18+25mm ||Yes |
| ||6000 ||550cm ||190w ||18+25mm ||Yes |
| ||10000 ||450cm ||135w ||25mm ||Yes |
| ||12000 ||500cm ||175w ||25mm ||Yes |
| ||15000 ||700cm ||290w ||20+25+30+40mm ||Yes |
| ||20000 ||800cm ||450w ||20+23+30+40mm ||Yes |
Please note - Max Delivery Head is the maxium height the water will reach if it's going up a tube. For example 600lph pump would be able to get water up a tube to a height of 110cm but no higher. If you wanted it to go up 110cm and then flow out of the tube you would need the next tube size up.
This is based on the tube being a 1" tube.
Other pump ranges(please click on the link to visit these pages)
The Libel Range:
- Our standard range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. They can also be used to power a water feature or as a pond pump; however we recommend the Tornado range for this. Please note the shape of the pump changes as the size of the pump changes to accomodate larger pump motors - the pump you receive may not be the same appearance as the image above.
The Elimax Range
- Our premium range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. The Elimax range can also be used to power a water feature or as a pond pump; however we do not recommend them for this since in this case you are paying for fountain accessories which you don’t need – you are better off with the water feature pumps (See Above) which are less expensive since they have no accessories.
We also sell tubing (hose) for water features (click here) and hose clamps (click here). In addition you can purchase a fountainhead with LED lights (click here).
We can supply on request; hose connectors, 3 way valves, and other accessories – please contact us on 0118 903 5210 or email firstname.lastname@example.org with your requirements.
Creating a cascade
If you want to pump water to create a cascade / waterfall of a given width and height 120cm, the pump you need depends on the width as follows:
|Cascade width||Pump for cascade height of 120cm|
|30cm||4000 litres / hour|
|60cm||6000 litres / hour|
|90cm||10000 litres / hour|
|120cm||12000 litres / hour|
|150cm||15000 litres / hour|
For example to create a waterfall of width 90cm and height 120cm, use the 10,000 litres / hour pump (The 10000).
If your specification is ‘between pumps’ it is always advisable to go for the slightly higher powered pump than you need – you can always reduce the flow but you cannot increase it beyond the capacity of the pump.
Call us (0118 903 5210, email@example.com) if you need help in choosing the correct pump.
This product carries a 2 year guarantee
350 = Height 6cm (2.4 inches) Depth 4.5cm (1.8 inches) Nozzle 1.3cm (0.5 inches)
450 = Height 5cm (2 inches) Depth 5.5cm (2.2 inches) Nozzle 1.5cm (0.6 inches)
600 = Height 6cm (2.4 inches Depth 6.5cm (2.6 inches) Nozzle 1.5cm (0.6 inches)
750 = Height 6.5cm (2.6 inches) Depth 7cm (2.8 inches) Nozzle 2.5cm (1 inch)
1000 = Height 8.5cm (3.3 inches) Depth 8.5cm (3.3 inches) Nozzle 2.5cm (1 inch)
1500 = Height 9cm (3.5 inches) Depth 9.5cm (3.7 inches) Nozzle 3.5cm (1.4 inches)
2000 = Height 10.5cm (4.1 inches) Depth 10.5cm (4.1 inches) Nozzle 4cm (1.6 inches)
3000 = Height 13cm (5.1 inches) Depth 12.5cm (4.9 inches) Nozzle 4.5cm (1.8 inches)
4000 = Height 12cm (4.7 inches) Depth 19cm (7.5 inches) Nozzle 5cm (2 inches)
6000 = Height 13.5cm (5.3 inches) Depth 20cm (7.9 inches) Nozzle 4cm (1.6 inches)
10000 = Height 15cm (5.9 inches) Depth 26.5cm (10.4 inches) Nozzle 4.5cm (1.8 inches)
12000 = Height 15cm (5.9 inches) Depth 26.5cm (10.4 inches) Nozzle 4.5cm (1.8 inches)
15000 = Height 14.5cm (5.7 inches) Depth 25cm (9.8 inches) Nozzle 8cm (3.1 inches)
20000 = Height 15cm (5.9 inches) Depth 26cm (10.2 inches) Nozzle 6.5cm (2.6 inches)
30000 = Height 23cm (9.1 inches) Depth 29.5cm (11.6 inches) Nozzle 4.5cm (1.8 inches)