H205cm Classical 3-Tier Stone Fountain - Pond Use by Ambienté

Code: WF0276-3TP
H205cm Classical 3-Tier Stone Fountain - Pond Use by Ambienté
< > < >
H205cm Classical 3-Tier Stone Fountain - Pond Use by Ambienté
Cable Length1000 cm( 32 ft 9 in )
Pump power3000 LPH
Height205 cm( 6 ft 8 in )
Diameter112 cm( 3 ft 8 in )
Weight430 Kg
This classic fountain is made using a white sand concrete with grains of marble and a steel re-enforced base and is suitable for use on its own or in a pond.

There are two main versions:
The Three Tier Version (above) and the Two Tier Version (click here to view). Both are available as: Standard version, and a Pond Version.
We also offer a Tall Two Tier version. (click here to view).

With the Standard Version, water is pumped from the bottom bowl to the top of the feature. The Pond Version is suitable for installation in a pond or pebble pool and is supplied with a larger pump and regulator plus valve fittings, allowing water to be pumped from the base of the fountain instead of from the bottom bowl. If you need a pebble pool to go beneath the Pond Version, we recommend the FiniaTM 1800

This beautiful fountain is compatible with our Classical Stone Fountain Surround.

To add this item to your purchase and complete the look here, simply click Add + and continue to check out as usual.

Optional Extras Selected items will be included with your purchase

I'm confused! Could you explain all these options?

It really depends if you want the water to fall all the way to the ground or not.

Standard version:
The simplest option is for the water to be pumped back to the top from the lowest bowl (ie the bowl of the fountain about 2 feet off the ground). The pump sits in that lower bowl (hidden from view in the centre column). In this case, the water never falls to the ground. It's the cheapest option and easiest to construct. You don't need to do any ground works, other than provide a secure base for the fountain to stand on. The electric cable (10m, supplied) bases down to the ground through a hole in the central column of the fountain so you can exit it through the ground invisibly.

Pond version.
If you want the water to fall all the way to the ground, you have three options.

1) Stand the fountain in a pond.
The pond becomes the reservoir and the pump sits in the pond, pumping water back to the top of the fountain through a hole in the central column. The lower bowl of the fountain fills with water until full then water tips down into the pond.

2) Use an underground reservoir. This is plastic, dug into a hole in the ground. The reservoir supports the weight of the fountain. You cover the lid of the reservoir with pebbles. The pump sits in the water in the reservoir underground and pumps the water back to the top through a pipe through the centre of the fountain.

3) Use the optional surround to create a waterproof reservoir or mini-pond at the base of the fountain.
With this option, the water is visible in the pool created by the optional surround at ground level. Instead of digging a hole for the reservoir, you need to construct a concrete base, then use concrete to join together the components of the optional surround. The concreting you do will make the base pool waterproof, this is more suitable for the advanced DIY customers or as a builders project.

Installation Instructions
To view a PDF file containing detailed installation instructions, please click on the following link: Click here to view the instructions

All versions are supplied complete with the correct pump:

Dimensions: Three tier

  • Standard version - Height 205cm(81ins); Bottom bowl diameter 112cm(44ins); Weight 430kg; Pump 2000 litres / hour
  • Pond version - Height 205cm(81ins); Bottom bowl diameter 112cm(44ins); Weight 430kg; Pump 3000 litres / hour

The height of the base pedestal is 70cm and the diameter is 100cm

Optional surround

This eight piece surround is made using a white sand concrete with quartz stone and a steel re-enforced base. Suitable for the three tier water feature (the surround would look best with the full 3 tier version, however it will look great on any version or even on it's own).
Height 28cm(11"), Diameter 210cm(6ft 11")
The diameter for the large bowl is 112cm (Height 28cm; 127kg)

Matching products

Suitable for outdoor use

Customer Reviews

Average Rating: 4.0/5 (1 review)

Rating: 4/5

"Be warned, it will take 2 or 3 grown men to lift some elements of the fountain into place, but fitting was relatively easy (with the 3 of us). I did have some questions on fitting the surround (bought as an extra), and the fitting instructions were not as helpful as they could have been (ie, fitting measurements from edge of circular fountain base to edge of surround would have been helpful) . I tried to email Ambiente, the manufacturers (their details are provided in the data sheet / instructions) regarding recommended sealant for the joints, but they do not / did not answer the email and their phone is always engaged. I eventually found specialist sealant (I had to research this myself) on-line, to seal the joints and make them water-tight, as I am using the surround to act as the collection pool for the pump. THe quality of the fountain was OK, there were a few chips/blemishes, but I have installed the fountain so these are out of sight when the fountain is viewed from most angles. When leveling the fountain, so the water flows over each edge of each bowl, allow time to get the levels correct and it will require two people . Delighted with the finished result, and giving it 4 stars due to the niggling quality issues and also additional information which would have made installation a little easier all round."

Reviewed Friday, 25 May 2018

Other people looked at

1 to 6 (of 6 products)    View all    1