1,500LPH Mains Powered Water Feature Pump

Our best range of pumps for powering water features and cascade waterfalls. They come in a wide range of sizes and the design of the pump does vary (see table below) depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.

Read more about setting up your pump for a cascading waterfall

Our pumps are reliable, efficient and guaranteed for two years. We recommend them for use in water features and cascades / waterfalls. They do not come with fountainheads and are not for creating fountains - if you want to create a fountain we recommend our Elimax or Libel range which are supplied with one or more fountainheads.

Our pumps are available in a range of sizes, from 350 litres / hour to 30,000 litres per hour. Each pump is supplied with 10 metres of cable except the 600lph and 750lph which has a 5m cable.

	Max Performance	Max Delivery Head	Power Consumption	Outlet Hosetail Size	Multi-size Hosetail	Cable Length	Dimensions (Height x Depth)
	350LPH	40cm	6W	8 + 13mm	Yes	10m	6cm x 4.5cm
	450LPH	50cm	5W	8 + 12mm	Yes	10m	5cm x 5.5cm
	600LPH	110cm	8W	8 + 12mm	Yes	5m	6cm x 6.5cm
	750LPH	160cm	12W	12mm	No	5m	6.5cm x 7cm
	1000LPH	180cm	16W	12 + 15 + 18mm	Yes	10m	8.5cm x 8.5cm
	1500LPH Currently Viewing	250cm	25W	15 + 18mm	Yes	10m	9cm x 9.5cm
	2000LPH	320cm	45W	18 + 25mm	Yes	10m	10.5cm x 10.5cm
	3000LPH	370cm	70W	16 + 18mm	Yes	10m	13cm x 12.5cm
	4000LPH	400cm	99W	18 + 25mm	Yes	10m	12cm x 19cm
	5000LPH	550cm	190W	18 + 25mm	Yes	10m	13.5cm x 20cm
	10000LPH	450cm	135W	25mm	Yes	10m	15cm x 26.5cm
	12000LPH	500cm	175W	25mm	Yes	10m	15cm x 26.5cm

Please note - Max Delivery Head is the maxium height the water will reach if it's going up a tube. For example 600lph pump would be able to get water up a tube to a height of 110cm but no higher. If you wanted it to go up 110cm and then flow out of the tube you would need the next tube size up.
This is based on the tube being a 1" tube.

Other pump ranges (please click on the link to visit these pages)

The Libel Range:
- Our standard range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. They can also be used to power a water feature or as a pond pump; however we recommend the Tornado range for this. Please note the shape of the pump changes as the size of the pump changes to accomodate larger pump motors - the pump you receive may not be the same appearance as the image above.

The Elimax Range
- Our premium range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. The Elimax range can also be used to power a water feature or as a pond pump; however we do not recommend them for this since in this case you are paying for fountain accessories which you don't need - you are better off with the water feature pumps (See Above) which are less expensive since they have no accessories.

Other accessories

We also sell tubing (hose) for water features (click here) and hose clamps (click here). In addition you can purchase a fountainhead with LED lights (click here).

We can supply on request; hose connectors, 3 way valves, and other accessories - please call us on 0118 903 5210 or email info@primrose.co.uk with your requirements.

Creating a cascade

If you want to pump water to create a cascade / waterfall of a given width and height 120cm, the pump you need depends on the width as follows:

For example, to create a waterfall of width 90cm and height 120cm, use the 10,000 litres / hour pump (The 10000).
If your specification is 'between pumps' it is always advisable to go for the slightly higher powered pump than you need - you can always reduce the flow but you cannot increase it beyond the capacity of the pump.

Contact us (call 0118 903 5210 or email info@primrose.co.uk) if you need help in choosing the correct pump.

This product carries a 2 year guarantee