Included with the Greenhouse:
Four fully adjustable roof vents are included, allowing you to alter the ventilation in the greenhouse to suit your needs. Plants prosper in different conditions, and these vents allow you to provide them with the optimal environment. For further control over ventilation, simply slide open the doors to allow an air flow into the greenhouse.
Corner plates, roof braces, and side braces are included with the greenhouse, giving the greenhouse a strong frame. Corner plates are situated at the eaves and ridges of the greenhouse to ensure that it has a solid structure. The roof and sides naturally take a heavy load, but the braces give the frame some extra support.
The Jupiter greenhouse can be used with this specially designed base, which will give you a flat surface to construct the greenhouse on. This provides the greenhouse structure with ensured stability.
It is recommended that at least two people take part in the assembly of this greenhouse. You will need screwdrivers and either a 10mm spanner or wrench. All relevant nuts, bolts, etc. are included. It is advised to pick a sunny spot, and if possible an area that is also sheltered from the wind.
Please note: the main image depicts a larger model of this greenhouse, the Jupiter 11500. You will be purchasing the smaller Jupiter 8300. Other than its size it is exactly the same. The length of the 8300 is 3.21m, the greenhouse shown in the image is 4.45m. The roof vent and brace images are from the silver Jupiter model, with the only difference being colour.
All customers will be contacted 48 hours prior to delivery.