Standard Marquee 4m x 6m, 180g /m² Waterproof PE, 38mm Steel Frame
The best quality standard marquee on the market... combining durability and flexibility with easy DIY assembly. Great for weddings, parties, shows, exhibitions, storage and as a car shelter.
- 240g PE canopy
- 180g PE sidewalls.
- Frame made from 38mm powder coated steel tubes. Connectors 42mm.
- Corner ropes and pegs included with marquee.
- BS5438 BS 7837 fire-rated.
- Industrial strength zips and heavy duty eyelets.
- Easy to assemble; full step-by-step instructions included.
- Eaves height: 2m
- Apex height: 3m (30° angle)
- Number of doors (end panels): 2
- Number of windows on each side: 3
- 2 years manufacturers guarantee.
What's the difference between the Standard marquees and the Luxury marquees?
The frames are the same for both marquees (6m wide marquees have extra roof supports - this is not needed for smaller marquees). The only difference is the thickness / quality of the material - the Luxury marquees use a luxurious thick 500gsm polyethylene / PVC composite (380g on the walls) which looks fantastic and is really durable.
The Luxury marquees are the correct choice if looks matter and / or if you are going to be using the marquee over and over again. The Standard marquees are more for 'one-offs' or occasional use.
The Luxury marquees are also extremely water tight, guaranteed not to leak. They have a greater 'water column' than the Standard marquees (the water column is a measure of the ability for water to 'sit' on the canopy without dripping through). After time, the Standard marquees may give rise to the odd 'drip' through the seams in heavy rain.
Our Luxury marquees have a manufacturers guarantee of 3 years. Our Standard marquees have a manufacturers guarantee of 2 years.
Our marquees essentially consist of 2m bays. As a result they are really easy to extend. If you find your marquee isn't quite big enough, you can buy an extension kit to extend the length to another of our standard sizes at a later date. Contact our customer services if you wish to do this.
Spares for all components available in our Spares category.
Which fixings do I need?
If you are putting your marquee on grass, as a minimum you need a set of four corner ropes with pegs. We also recommend (particularly on marquees of 6m width, but also on smaller models) our tie down kit consisting of tensioned straps and heavy duty tent pegs. These straps should be put along the sides of the marquee, at intervals of 2m.
You can also purchase the ground bar kit to give extra rigidity to the bottom of marquee.
The marquee can free stand on concrete as long as you purchase a ground bar kit to give a rigid frame throughout.
If possible, use ropes at the corners to secure the marquee as well.
Attach multiple marquees together with our range of joining kits. Available in PVC and PE.
|Size||4m x 6m|
|Type||Marquee, Party Tent|