Swedish Raised Deck Ponds by Norlogs - 100 gallon
A decorative pool for your patio or roof terrace. Our pools are made from Swedish timber from sustainable forests. The wooden slats slot together easily around the inner liner; only six screws are used in the assembly which should take no more than 15 minutes. Fill it with water lilies or create a small fountain using our optional fountain pump for the smaller models (Pump included with the 50 and 100 only).
Available in five sizes as follows (two small sizes (50 and 100) come with a liner and a 750lph mains powered pump. The other three sizes (175, 300 and 400) are without a pump). We recommend the 800 LPH Solar pump WF1211 to go with the larger pools.
- 50 gallon (227 litres) - Height 41cm (1ft 4"), diameter 122cm (4ft)
- 100 gallon (454 litres) - Height 41cm (1ft 4"), diameter 167cm (5ft 6")
- 175 gallon (795 litres) - Height 62cm (2ft), diameter 167cm (5ft 6")
- 300 gallon (1363 litres) - Height 59cm (1ft 11"), diameter 229cm (7ft6")
- 400 gallon (1818 litres) - Height 75cm (2ft 6"), diameter 226cm (7ft 6")
The liner for the ponds is PVC – same tough, durable spec as standard pond lining material. It’s shaped exactly to match the particular wooden pool surround. The liners aren’t self-supporting, but have ‘handles’ that hook discretely round the logs near the top of the wall.
Please Note: The 400g pool liner is made from 'EPDM Rubber' which is much stronger and more suitable to take the volume/weight of water.
If you want to put a water feature or fountain in the pond, such as the stone tiered water feature shown, that’s fine – it’s designed for that purpose. If the water feature is designed to be self-supporting, you can just ‘plonk’ it down on the liner without additional support - the only thing you need to protect against is the possibility that something sharp that could nick and pierce the lining - consider putting a protective layer – eg a piece of carpet underlay - between the base and liner.
- Height: 75 cm
- Diameter: 226 cm
Tips on Installation and Maintenance
A lot of water features come pre-assembled for the most part, with just a little hose/pump connecting to do before plugging it in to a solar panel or mains socket. Some of our bigger ones require wiring in a plug (which might involve a Part P Certified electrician), but otherwise all instructions will be included.
If you've got any questions, why not check out our Installation Guide for tips on installation location, power and even style tips!
|Location||Ponds & Pond Accessories|