Verona Two-Tiered Fountain

Code: WF0283
Verona Two-Tiered Fountain
Verona tiered fountain

This pretty fountain is made using a white sand concrete with grains of marble and a steel re-enforced base. Suitable for use on its own or in a pond.

There are two versions, a Standard version and a Pond Version. With the Standard Version, water is pumped from the bottom bowl to the top of the feature. The Pond Version is suitable for installation in a pond or pebble pool and is supplied with a larger pump and regulator plus valve fittings, allowing water to be pumped from the base of the fountain instead of from the bottom bowl.


  • Standard version - Height 115cm(3ft 9"); Bowl diameter 105cm(3ft 5"); Pump 1000 litres / hour
  • Pond version - Height 115cm(3ft 9"); Bowl diameter 105cm(3ft 5"); Pump 2000 litres / hour

Suitable for outdoor use

If you like this style but are looking for something bigger, have a look at our larger scale Siena fountain (click here to view).

Customer Reviews

Average Rating: 4.0/5 (1 review)

Rating: 4/5

"I have 3 comments on the design of the unit: 1 The pump is difficult to locate without a cover over the conical hole in the lower basin. A non-corroding metal plate or concrete plug with slot for cable should be provided. 2 There is no specific provision for entry of water to the interior of the upper pedestal if the tapered concrete wall plug is fitted. There should preferably be some slots in the bottom of the pedestal or the pedestal has to be raised on the wedges provided (but not for this purpose). 3 Finally a spray/distributor would improve the flow discharge and would be inexpensive to provide."

Reviewed Sunday, 14 July 2013

Other people looked at

1 to 6 (of 6 products)    View all   List List List  1