Water Feature Pumps 600 LPH - mains powered

Code: WF0301600
Water Feature Pumps 600 LPH - mains powered
For our handy guide, please take a look Here

I was delighted with the pump as it was very easy to install and it has given my water feature a new lease of life. More...
Water Feature Pump - 600LPH - mains powered

Our best range of pumps for powering water features and cascade waterfalls. They come in a wide range of sizes and the design of the pump does vary (see table below) depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.

Read more about setting up your pump for a cascading waterfall

Our pumps are reliable, efficient and guaranteed for two years. We recommend them for use in water features and cascades / waterfalls. They do not come with fountainheads and are not for creating fountains - if you want to create a fountain we recommend our Elimax or Libel range which are supplied with one or more fountainheads.

Our pumps are available in a range of sizes, from 350 litres / hour to 30,000 litres per hour. Each pump is supplied with 10 metres of cable except the 600lph and 750lph which has a 5m cable.

Max Performance Max Delivery Head Power Consumption Outlet Hosetail Size Multi-size
Cable Length Dimensions
(Height x Depth)
40cm 6W 8 + 13mm Yes 10m 6cm x 4.5cm
50cm 5W 8 + 12mm Yes 10m 5cm x 5.5cm
Currently Viewing
110cm 8W 8 + 12mm Yes 5m 6cm x 6.5cm
160cm 12W 12mm No 5m 6.5cm x 7cm
180cm 16W 12 + 15 + 18mm Yes 10m 8.5cm x 8.5cm
250cm 25W 15 + 18mm Yes 10m 9cm x 9.5cm
320cm 45W 18 + 25mm Yes 10m 10.5cm x 10.5cm
370cm 70W 16 + 18mm Yes 10m 13cm x 12.5cm
400cm 99W 18 + 25mm Yes 10m 12cm x 19cm
550cm 190W 18 + 25mm Yes 10m 13.5cm x 20cm
450cm 135W 25mm Yes 10m 15cm x 26.5cm
500cm 175W 25mm Yes 10m 15cm x 26.5cm
700cm 290W 20 + 25 + 30 + 40mm Yes 10m 14.5cm x 25cm
800cm 450W 20 + 23 + 30 + 40mm Yes 10m 15cm x 26cm
- - - - - - - - - - - - - - - - - - - - 10m 23cm x 29.5cm
180cm 450W 12 + 15 + 18mm Yes 0m x

Please note - Max Delivery Head is the maxium height the water will reach if it's going up a tube. For example 600lph pump would be able to get water up a tube to a height of 110cm but no higher. If you wanted it to go up 110cm and then flow out of the tube you would need the next tube size up.
This is based on the tube being a 1" tube.

Other pump ranges (please click on the link to visit these pages)

The Libel Range:
- Our standard range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. They can also be used to power a water feature or as a pond pump; however we recommend the Tornado range for this. Please note the shape of the pump changes as the size of the pump changes to accomodate larger pump motors - the pump you receive may not be the same appearance as the image above.

The Elimax Range
- Our premium range for powering fountains. They come in a range of sizes and are supplied with fountainheads and other accessories. The Elimax range can also be used to power a water feature or as a pond pump; however we do not recommend them for this since in this case you are paying for fountain accessories which you don't need - you are better off with the water feature pumps (See Above) which are less expensive since they have no accessories.

Other accessories

We also sell tubing (hose) for water features (click here) and hose clamps (click here). In addition you can purchase a fountainhead with LED lights (click here).

We can supply on request; hose connectors, 3 way valves, and other accessories - please call us on 0118 903 5210 or email info@primrose.co.uk with your requirements.

Creating a cascade

If you want to pump water to create a cascade / waterfall of a given width and height 120cm, the pump you need depends on the width as follows:

Cascade width Pump for cascade height of 120cm
30cm 4000 litres / hour
60cm 6000 litres / hour
90cm 10000 litres / hour
120cm 12000 litres / hour
150cm 15000 litres / hour

For example, to create a waterfall of width 90cm and height 120cm, use the 10,000 litres / hour pump (The 10000).
If your specification is 'between pumps' it is always advisable to go for the slightly higher powered pump than you need - you can always reduce the flow but you cannot increase it beyond the capacity of the pump.

Contact us (call 0118 903 5210 or email info@primrose.co.uk) if you need help in choosing the correct pump.

This product carries a 2 year guarantee

Customer Reviews
Rating: 5/5

"Well packaged and complete"

Reviewed Saturday, 14 October 2017

Rating: 5/5

"Quick service and we'll packaged"

Reviewed Thursday, 14 September 2017

Rating: 5/5

"Exactly what I wanted for my fountain."

Reviewed Monday, 7 August 2017

Rating: 5/5

"This little pump is doing a great job!"

Reviewed Sunday, 30 July 2017

Rating: 4/5

"good pump but itwas little big so Idone some adjustment"

Reviewed Wednesday, 12 July 2017

Rating: 1/5

"No plug attached -we had to source our own - very bad service."

Reviewed Sunday, 9 July 2017

Answer from Primrose: "Thank you for your review. We're sorry for any inconvenience caused, but unfortunately items intended for outdoor use cannot be supplied with a plug attached, as this would be in contravention of Part P of The Building Regulations 2000. Plugs are easily purchased at a DIY store, if you have any further questions please contact the Customer Service team."
Rating: 4/5

"Perfect replacement, clear description.
Good quality.

Reviewed Friday, 7 July 2017

Rating: 5/5

"working well after sluggish start"

Reviewed Wednesday, 5 July 2017

Rating: 5/5


Reviewed Wednesday, 5 July 2017

Rating: 5/5

"Very pleased with the pump. Wasn't sure which I wanted but chose well"

Reviewed Thursday, 20 October 2016

View more

Other people looked at

1 to 6 (of 6 products)    View all   List List List  1